Airstop Vinyl Repair

Airstop creates a permanent seal in minutes and can be used to repair any PVC material.

• Plain PVC or PVC coated nylon or rayon can be repaired as well as vinyl rain suits and tarps
• Contents: 8ml

Directions:

1. Thoroughly clean and dry the damaged area. Completely deflate if an inflatable article.
2. When the damage is small (a pin hole or tear under 2 inches) apply a light coat of AirStop two or three times. Allow 5 minutes to dry between each application.
3. For heavier material, e.g. fabric backed vinyl or a vinyl boat, apply up to five coats allowing a 5 minute drying time between coats.
4. Ensure the AirStop is completely dry before resuming use of the article.
5. When the damage is more extensive, cut a patch (with rounded corners) using any vinyl material. Generously coat the damaged area spreading the Airstop at least 3/8” from the torn edges. Apply the patch and apply Airstop to all edges of the patch making a seal between patch and the item being repaired. Allow the article to dry at least 10 hours before using.